MultiSensor AI vs. FLIR

Already run FLIR cameras? Keep them. Add vibration on the same asset, see both in one view, and play back what happened.

At-a-Glance Comparison

Feature FLIR MultiSensor AI
Core sensing

Fixed radiometric thermal cameras, plus separate fixed acoustic imaging cameras for partial discharge and pressurized leaks

Fixed radiometric thermal and visual imaging, with contact vibration sensing on the same asset

Vibration

Sold separately: SV88 and SV89 wireless vibration and temperature sensors, connected through FLIR's GW66 gateway, which outputs over Modbus, MQTT, or OPC UA

Vibration sensors on the same asset sample overall vibration in under 1 second in the same platform as thermal

Monitoring software

AURA Continuous Condition Monitoring: cloud SaaS with thermal trends, anomaly detection, and historian analytics; published scope is thermal and visual

Shows thermal and vibration trends for the same asset, in one view

Video for verification

AURA references historical thermal and visual data; video recording and retention aren't published

Continuous recordings and alert video clips stored for playback and root-cause review, with retention set to your requirements

What you learn

How fast heat is building on what the camera can see

Severity from vibration and progression from thermal, together

Solution scope

Fixed thermal and acoustic cameras with AURA software; vibration sensors and gateway as a separate product line

Sensors, hub, and platform supplied as one solution; works with FLIR A50/A70 and A500/A700 fixed thermal cameras

Based on each vendor's published information as of November 3, 2026.

What FLIR Cameras Alone Don't Show

Heat and vibration, in separate places

FLIR cameras show heat on the surfaces in their field of view. FLIR also sells vibration sensors, but as a separate product line that connects through its own gateway, so heat and vibration don't come together in one view. Thermal shows how quickly a fault is progressing, but mechanical faults like bearing wear, imbalance, and misalignment often change vibration before they generate heat.

img-182

A camera sees surfaces, not mechanical behavior

A fixed thermal camera shows the surfaces in its field of view and misses assets outside its line of sight. A contact vibration sensor measures how the motor, gearbox, or bearing it's mounted on is behaving. With heat alone, teams see progression but not severity.

img-183

Why FLIR Users Add MultiSensor AI

See Real-World Results, Then Plan for Yours

 “[It] cements in that there is an issue." On seeing thermal and vibration on the same asset.
photo-09
Joe Marquis Senior Engineering Manager Manchester Airports Group

At Manchester Airport, a misfeed onto a baggage sorter caused a large pile-up. Using playback of synchronized thermal and visual footage, the team traced the root cause to a PLC logic misfeed that had cleared itself, so it could be fixed rather than guessed at.

img-184

Frequently Asked Questions

We already use FLIR cameras. Can MultiSensor AI use them?

Yes. MultiSensor AI works with FLIR A50/A70 and A500/A700 fixed thermal cameras, so you can add vibration sensing and see both signals on the same asset without replacing the cameras you already run.

What does MultiSensor AI supply?

Everything needed to monitor an asset: fixed thermal and visual sensors, vibration sensors, the MultiSensor AI Hub for on-site data collection, and the MultiSensor AI platform.

Why add vibration if we already monitor heat?

Vibration and thermal tell you different things. Vibration shows how much an asset's mechanical behavior has changed, and it often changes before a fault generates heat. Thermal shows how fast that fault is progressing toward failure. Together, they give a clearer picture of both severity and progression than either one alone.

FLIR sells vibration sensors too. What's the difference?

FLIR's SV88 and SV89 vibration sensors connect through FLIR's gateway, which sends their data to other systems over Modbus, MQTT, or OPC UA. FLIR's AURA monitoring software is published as thermal and visual. MultiSensor AI brings vibration and thermal for the same asset into one platform and one view.